• Two products in ONE single step: cleaner and polish
• Protects LVT floors against scuffs and scratches
• Unique patent-pending formula is biodegradable, water-based, low-odor and has low VOCs
• Makes old floors look like new again
• Designed for easy use
• Made in the USA

DIRECTIONS:

• ONLY for occasional use to refresh worn finishes.
• Strip off any wax thoroughly before using.
• Make sure all dirt is completely cleaned from floor before applying polish.

• Throughly clean floor 2-3 times using a standard vinyl flooring cleaner.
• Apply a small amount in an 'S' shape pattern and spread immediately using a clean, damp sponge mop.
• Apply 1-2 thin coats. Allow 30 mins. between coats.
• Allow 2 hr. drying time before replacing furniture.

• Thoroughly clean floor 2-3 times using a standard vinyl flooring cleaner. Stains, scuff marks, grit, oil or other contaminates should be removed.
• To reduce the visibility of deeper scratches, rub in the direction of the grain with a damp green scrubbing pad.
• Stains or spots that have not been removed prior to application of Single-Step will be permanently embedded into your floor!

• Shake bottle to mix.
• Apply a small  'S' shape pattern and spread immediately using a clean, damp sponge mop. Apply thin coats only! If layer is applied too thickly, it may result in cloudiness. 
• Mop evenly in the direction of the wood grain. Press liquid into stubborn areas. Do not walk on wet areas. 
• Avoid large puddles, thicker areas, or uneven mopping. Rinse mop often with clean water.