Specially formulated for Click or T&G Glue Floors. CalFlor was the first American manufacturer to introduce a floor adhesive certified to meet the tough European D3 standards for flooring! Reformulated to include NO formaldehyde or acrylamide (common T&G glue additives) and has a low VOC content. This improved formula has the same water-resistance , high strength and flexibility of our original D3/Type II Eurobond glue.
High strength, flexible cross-linking formula.
Flexibility results in a stronger bond.
Ideal for wet areas like kitchens and bathrooms
One bottle covers 124 – 200 sq ft
Low VOC - Formaldehyde and acrylamide free
Made in the USA
FOR USE ON:
Pre-finished Wood, Laminate, Cork and Engineered Flooring!
DIRECTIONS:
Laminate:Trim tip opening to 1/16"
Wood:Trim tip opening to 1/8"
Glue must be applied to entire length of seam.
Squeeze a continuous bead of glue onto the top side of the tongue and the bottom of the grove.
By Placing glue on the bottom, you are assured of a strong bond. This will also reduce gapping over life of the floor.
DO NOT fill in groove as this may result in gapping
Assemble planks.
Allow 10 - 15 minutes set-up.
Using a plastic putty knife, remove excess glue and wipe seam with a damp cloth (keeping cloth clean).
Allow to dry for 24 hours before walking on floor.